Face Fit Tester Training - Combined 2-day Course

OVERVIEW

IOM also offers Face Fit Testing services, click here to find out more.

Many people use respiratory protective equipment (RPE) to reduce their exposure to hazardous substances in the workplace.  But many of these people are not getting the protection they think they are – or that they deserve.

Respirators must be selected not only to give the appropriate protection but also to fit each and every wearer.  This is particularly important where the respirator relies on a tight seal between the mask and the wearers face.

Ask yourself:

• Does the RPE you provide to each employee fit them properly?
• Would you know if changes occur which could affect and reduce the fit?
• Have any face fit tests which have been carried out been conducted by a competent tester?

If you are unsure of the answers or require information on the fit testing of respirators IOM can offer training to your staff members to enable them to conduct face fit testing of respirators using either a Qualitative Test Method or a Quantitative Test Method course (Portacount®) or both.

Remember it is a legal requirement that workers who use tight-fitting respiratory protective equipment must be fit tested by a competent person; refer to COSHH, CLAW and CAR and Ionising Radiation Regulations or further details.

OBJECTIVES

The training is designed to provide those attending with an understating of how to use the test equipment, how to conduct the tests and how to evaluate the results of the tests.

Please note that we cannot provide Fit2Fit accreditation and individuals must sit and pass the Fit2Fit exam, provided by BSIF, to achieve such accreditation.   IOM and BSIF recommend that before accreditation is sought testers gain sufficient experience of the equipment and conducting the tests and importantly a wide knowledge of the different types of tight-fitting RPE available. 

WHO SHOULD ATTEND?

Anyone intending to conduct face fit testing.

We will be adhering to our risk assessment protocols regarding COVID-19 restrictions.

COURSE OUTLINE

We provide two courses which can be attended separately or combined:

• 1 Day Qualitative Test Method Course
• 1 Day Quantitative Test Method Course (Portacount®)
• 2 Day Combined Course (both qualitative and quantitative methods)

 For both courses:

• RPE Selection and Face Fit Testing
• Theory behind Test Methods
• Emphasis on Practical Training Sessions
• Experienced Trainers with their own accreditation for the test methods
• Troubleshooting tips
• Small classes for better tuition
• A range of RPE to learn with

The HSE has provided guidance on extra procedures to minimise transmission of COVID-19 during face fit testing which our trainer follows.

COURSE ASSESSMENT

• Theoretical question paper
• Practical Face Fit assessment

Please note, this course helps prepare for attaining Fit2Fit accreditation, but does not provide it.  By passing this course, attendees will show they have the basic knowledge and practical abilities to start face fit testing.  However, only by then gaining experience and then passing the Fit2Fit accreditation exam will anyone be able to prove their competency.

CERTIFICATION

A Certificate of Attendance will be provided for each person attending the course and demonstrating that they have understood the course content and have a basic knowledge in the use of the test method equipment.

COST

Day 1 Qualitative Test Method - £330.00 + VAT per person

Day 2 Quantitative Test Method - £330.00 + VAT per person

Day 1 and Day 2 Combined Course - £600.00 + VAT per person

This is an open (public) course and may be subject to minimum numbers attending.

Further mentoring is available to help prepare you for Fit2Fit accreditation process. Please inquire at [email protected] for more details.